CA-IF1042VS-Q1.pdf

Overview

This CAN transceiver series complies with ISO 11898-2 (2016) High Speed CAN

(Controller Area Network) physical layer standard. All devices are designed for

CAN FD network with data rates up to 5Mbps (megabits per second). department

Devices with part numbers containing a "V" suffix have an auxiliary device for I/O level translation.

Auxiliary power input (used to set the input pin threshold and RXD output level).

This family of devices features low-power standby mode and remote wake-up request features.

In addition, all devices include a variety of protection features to improve device and

CAN network stability.

Product Features

• Complies with ISO 11898-2:2016 and ISO 11898-5:2007 physical layer

standard

• All devices support classic CAN and 5Mbps CAN FD (flexible

data rate)

• I/O voltage range supports 3.3V and 5V microcontrollers (MCUs)

• Ideal passive characteristics when not powered

- Bus and logic pins are in high impedance state (no load)

- No glitches on bus and RXD outputs on power up and down

• Protective properties

- Bus fault protection: ±70V

- Undervoltage on VCC and VIO (V models only) supply pins

Protect

- Driver Explicit Timeout (TXD DTO) – Low minimum data rate

to 4kbps

- Thermal Shutdown Protection (TSD)

• Receiver common mode input voltage: ±30V

• Typical loopback delay: 160ns

• Junction temperature range: -55°C to 150°C

• Available in SOIC8 package

• AEC-Q100 Grade 1

application

• Body control module

• Automotive gateway

• Advanced driver assistance systems

• Infotainment system

• Hybrid and electric vehicle power systems

• Personal transportation – e-bikes

• industrial control