·
|
|
|
WL1837MODGIMOCR
Phone Buy
Collect
Datasheet
DESCRIPTION
Features for the WL1837MOD General Integrates RF, power amplifiers (PAs), clock, RF switches, filters, passives, and power management Quick hardware design with TI module collateral and reference designs Operating temperature: –40°C to +85°C industrial temperature grade Small form factor: 13.3 × 13.4 × 2 mm 100-pin MOC package FCC, IC, ETSI/CE, and TELEC certified with PCB, dipole, chip, and PIFA antennas Wi-Fi WLAN baseband processor and RF transceiver support of IEEE Std 802.11a, 802.11b, 802.11g, and 802.11n 20- and 40-MHz SISO and 20-MHz 2 × 2 MIMO at 2.4 GHz for high throughput: 80 Mbps (TCP), 100 Mbps (UDP) 2.4-GHz MRC support for extended range and 5-GHz diversity capable Fully calibrated: production calibration not required 4-bit SDIO host interface support Wi-Fi direct concurrent operation (multichannel, multirole) Bluetooth and Bluetooth low energy ( WL1837MOD only) Bluetooth 5.1 secure connection compliant and CSA2 support (declaration ID: D052427 ) Host controller interface (HCI) transport for Bluetooth over UART Dedicated audio processor support of SBC encoding + A2DP Dual-mode Bluetooth and Bluetooth low energy TI’s Bluetooth and Bluetooth low energy certified stack Key benefits Reduces design overhead Differentiated use cases by configuring WiLink™ 8 simultaneously in two roles (STA and AP) to connect directly with other Wi-Fi devices on different RF channel (Wi-Fi networks) Best-in-class Wi-Fi with high-performance audio and video streaming reference applications with up to 1.4× the range versus one antenna Different provisioning methods for in-home devices connectivity to Wi-Fi in one step Lowest Wi-Fi power consumption in connected idle (< 800 μA) Configurable wake on WLAN filters to only wake up the system Wi-Fi and Bluetooth single antenna coexistence Description for the WL1837MOD The certified WiLink™ 8 module from TI offers high throughput and extended range along with Wi-Fi® and Bluetooth® coexistence (WL1837MOD only) in a power-optimized design. The WL18x7MOD is a Wi-Fi, dual-band, 2.4- and 5-GHz module solution with two antennas supporting industrial temperature grade. The device is FCC, IC, ETSI/CE, and TELEC certified for AP (with DFS support) and client. TI offers drivers for high-level operating systems, such as Linux and Android™. Additional drivers, such as WinCE and RTOS, which includes QNX, Nucleus, ThreadX, and FreeRTOS, are supported through third parties. All the evaluation(0)
|
