PIC32MX575F512H.pdf

• 80MHz/105DMIPS\, 32-bit MIPS M4K Core

• USB 2.0 On-The-Go Peripheral with integrated PHY

• CAN2.0b module with 1024 transmit/receive buffers

• 4 Dedicated DMA Channel for USB OTG

• 5 Stage pipeline, Harvard architecture

• MIPS16e mode for up to 40% smaller code size

• Single cycle multiply and hardware divide unit

• 32 x 32-bit Core Registers

• 32 x 32-bit Shadow Registers

• Fast context switch and interrupt response

• 512K Flash (plus 12K boot Flash)

• 64K RAM (can execute from RAM)

• 8 Channel Hardware DMA Controller

• Flash prefetch module with 256 Byte cache

• Lock instructions or data in cache for fast access

• Programmable vector interrupt controller

• Fast and Accurate 16 channel 10-bit ADC,

• Max 1 Mega samples per second at +/- 1LSB, conversion available during SLEEP & IDLE

• RUN, IDLE, and SLEEP modes

• Multiple switchable clock modes for each power mode, enables optimum power settings

• 8 hardware breakpoints (6 Instruction and 2 Data)

• 2 wire programming and debugging interface

• JTAG interface supporting Programming, Debugging and Boundary scan

• Fail-Safe Clock Monitor – allows safe shutdown if clock fails

• Hardware RTCC (Real-Time Clock and Calendar with Alarms)

• 2 Internal oscillators (8MHz & 31KHz)

• Watchdog Timer with separate RC oscillator

• Pin compatible with 16-bit PIC® MCUs

• Serial Communication Modules allow flexible UART/SPI/I2C™ configuration