PIC16F886-I/SO  Product Details

This powerful yet easy-to-program (only 35 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip's powerful PIC® architecture into a 28 pin package.The PIC16F886 features 256 bytes of EEPROM data memory, self programming, an ICD, 2 Comparators, 11 channels of 10-bit Analog-to-Digital (A/D) converter, 1 capture/compare/PWM and 1 Enhanced capture/compare/PWM functions, a synchronous serial port that can be configured as either 3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I2C™) bus and an Enhanced Universal Asynchronous Receiver Transmitter (EUSART). All of these features make it ideal for more advanced level A/D applications in automotive, industrial, appliances or consumer applications.

Product Features

· Factory calibrated to ±1%

· Software selectable frequency range of 8 MHz to 32 kHz

· Software tunable

· Two-Speed Start-Up mode

· Fail-safe clock monitoring for critical applications

· Clock mode switching during operation for low-power operation

· Power-Saving Sleep mode

· Power-on Reset (POR)

· Selectable Brown-out Reset (BOR) voltage

· Extended Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation

· In-Circuit Serial Programming™ (ICSP™) via two pins

· In-Circuit Debug (ICD) via two pins

· 100,000 erase/write cycle enhanced Flash program memory, typical

· 1,000,000 erase/write cycle data EEPROM memory, typical

· Data EEPROM retention > 40 years

· Self-reprogrammable under software control

· Programmable code protection

· Peripheral Features: Device Features: 1 input only pin 25 I/O High sink/source current 25 mA Interrupt-on-pin change option

· 1 input only pin

· 25 I/O

· High sink/source current 25 mA

· Interrupt-on-pin change option

· TMR0: 8-bit timer/counter with 8-bit prescaler

· TMR1 enhanced: 16-bit timer/counter with prescaler, External Gate Input mode and dedicated low-power 32 kHz oscillator

· TMR2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler

· Capture/Compare/PWM (CCP) module

· Enhanced Capture/Compare/PWM (ECCP) module with auto-shutdown and PWM steering

· Master Synchronous Serial Port (MSSP) module SPI™ mode, I2C™ mode with address mask capability

· Supports RS-485, RS-232 and LIN compatibility

· Auto-Baud Detect

· Auto-wake-up on Start bit

· Ultra Low-Power Wake-up (ULPWU)

· 10-bit 11 channel Analog-to-Digital (A/D) Converter

· Programmable on-chip Voltage Reference (CVREF) module (% of VDD)

· Fixed 0.6 Vref

· Comparator inputs and outputs externally accessible

· SR Latch mode