STM32F407VET6 Product Details

Description

The STM32F405xx and STM32F407xx family is based on the high-performance Arm® Cortex®-M4 32-bit RISC core operating at a frequency of up to 168 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision which supports all Arm single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security. The STM32F405xx and STM32F407xx family incorporates high-speed embedded memories (Flash memory up to 1 Mbyte, up to 192 Kbytes of SRAM), up to 4 Kbytes of backup SRAM, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, three AHB buses and a 32-bit multi-AHB bus matrix.
All devices offer three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timers for motor control, two general-purpose 32-bit timers. a true random number generator (RNG). They also feature standard and advanced communication interfaces.

All features

· Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator) allowing 0-wait state execution from Flash memory, frequency up to 168 MHz, memory protection unit, 210 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions

· Memories

· Up to 1 Mbyte of Flash memory

· Up to 192+4 Kbytes of SRAM including 64-Kbyte of CCM (core coupled memory) data RAM

· 512 bytes of OTP memory

· Flexible static memory controller supporting Compact Flash, SRAM, PSRAM, NOR and NAND memories

· LCD parallel interface, 8080/6800 modes

· Clock, reset and supply management

· 1.8 V to 3.6 V application supply and I/Os

· POR, PDR, PVD and BOR

· 4-to-26 MHz crystal oscillator

· Internal 16 MHz factory-trimmed RC (1% accuracy)

· 32 kHz oscillator for RTC with calibration

· Internal 32 kHz RC with calibration

· Low-power operation

· Sleep, Stop and Standby modes

· VBAT supply for RTC, 20×32 bit backup registers + optional 4 KB backup SRAM

· 3×12-bit, 2.4 MSPS A/D converters: up to 24 channels and 7.2 MSPS in triple interleaved mode

· 2×12-bit D/A converters

· General-purpose DMA: 16-stream DMA controller with FIFOs and burst support

· Up to 17 timers: up to twelve 16-bit and two 32-bit timers up to 168 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input

· Debug mode

· Serial wire debug (SWD) & JTAG interfaces

· Cortex-M4 Embedded Trace Macrocell™

· Up to 140 I/O ports with interrupt capability

· Up to 136 fast I/Os up to 84 MHz

· Up to 138 5 V-tolerant I/Os

· Up to 15 communication interfaces

· Up to 3 × I2C interfaces (SMBus/PMBus)

· Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control)

· Up to 3 SPIs (42 Mbits/s), 2 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock

· 2 × CAN interfaces (2.0B Active)

· SDIO interface

· Advanced connectivity

· USB 2.0 full-speed device/host/OTG controller with on-chip PHY

· USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI

· 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII

· 8- to 14-bit parallel camera interface up to 54 Mbytes/s

· True random number generator

· CRC calculation unit

· 96-bit unique ID

· RTC: subsecond accuracy, hardware calendar